This is topic good choice? eumig 610D in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002769
Posted by Louis Li (Member # 776) on May 02, 2007, 08:21 AM:
was actually asking for opinions to decide between
1. Eumig 610D
2. Sankyo Deluxe 2000H
3. chinon Sound 9500mv
think ill go for the 610D because i love the simplicity of it.
Any current users of this particular model?
I do need to know where i can find the bulb for it though
and if it has the 'interchangeble sprocket wheel' that the 800D series have.
or is this model different?
[ May 02, 2007, 10:35 AM: Message edited by: Louis Li ]
Posted by Knut Nordahl (Member # 518) on May 04, 2007, 02:12 AM:
I know the little brother of both the 610D and the sankyo dualux 2000, the 1000.
They are both dual machines and you change between reg/super by flicking a switch. No need to replace a sprocket wheel.
The 610D has 18 - 9 - 6 - 3 - still frame projection
the dualux is 18 TO 9 fps (and by removing the backside you can gain access to the speed controll and remove the stop pin, hence increecing the fps area slight. NOTE: I'm speaking of the 1000 but the 2000 is probably the same)
Both the 610 and the 2000 use 12/100 watt lamp
http://www.super8stuff.com/lamps.html
I use the 607D in a telecine setup today an am very pleaced with the performance of this little machine. Then again I like Eumig.
I'd go for the 610D
I dont know the chinon Sound 9500mv, but that seems to be another "type" of projector.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2