8mm Forum: Need a Rear Film Guide Assembly ST-1200

This is topic Need a Rear Film Guide Assembly ST-1200 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003335

Posted by Dan Lail (Member # 18) on December 25, 2007, 11:12 PM:

I need a Rear Film Guide Assembly for an ST-1200. Anyone know where I can find one?

Kev or Doug, feel free to delete this post since I put it in the wrong category. [Big Grin]

Posted by Kevin Faulkner (Member # 6) on December 26, 2007, 05:48 AM:

Dan, I dont think there is a problem putting your request in this section as it's just a spare part your after.

I'm not 100% sure what part your meaning? Can you take a pic? I do have a few ST1200 parts so might be able to help.

Kev.

Posted by Dan Lail (Member # 18) on December 26, 2007, 11:46 AM:

Kev!

Since I don't have the part I can't take a pic. [Frown]

If you go to film-tech and look at the ST-1200HD Owner's Manual it's part number 29 on page 10. [Cool]

Posted by Kevin Faulkner (Member # 6) on December 26, 2007, 02:34 PM:

I take it this is the part your desire? Its the last one I have.

Kev.

Posted by Dan Lail (Member # 18) on December 26, 2007, 06:58 PM:

Kev, that's the part I need. I'll send you an email. Thanks.

Posted by Kevin Faulkner (Member # 6) on December 28, 2007, 04:57 PM:

Dan, Not had that email yet?

Kev.

Posted by Dan Lail (Member # 18) on March 19, 2008, 03:38 PM:

Kev! I just sent the email. [Smile]

Posted by Dan Lail (Member # 18) on July 27, 2009, 08:00 PM:

Kev, I installed the new rear guide assembly you sent me. Wow! it looks great. When I went to screw in the shaft that holds the assembly to the projector I saw there were no threads. The threaded metal sleeve in the chassis was missing. Yikes! I visited the hardware store and found a small metric thread nut. I bought a bolt to go with it. I threaded the nut over the bolt and clamped it in a pair of vice grips and proceeded to file the sides of the nut until the corners were gone and it was round. Then I drilled a larger hole in the chassis so the nut would fit snug. A few drops of super glue on the nut and placed it in the hole while it was still on the bolt in order to line it up perpendicular to the chassis. When it dried I installed the rear guide and it works beautifully. I am a happy camper. Thanks.

UBB.classic^TM 6.3.1.2