8mm Forum: Eumig machines ...multi voltage?

This is topic Eumig machines ...multi voltage? in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003500

Posted by Alan Rik (Member # 73) on February 29, 2008, 09:14 AM:

Hi Eumig owners...
I have been offered a Eumig S940 but it looks like its a 110-240v 50hz machine for Europe. I had one for the US but it stated it was 117v 60hz. Is there a way you lovely members can check your machine to see if you can set it for US voltage? The manual says some models are equipped with the ability to change the belt and to assign the motor to a different tap, 50hz or 60hz. I don't want to purchase anything until I know for sure I can use this here in the US.
Thanks,
Rik

Posted by David Pannell (Member # 300) on March 01, 2008, 07:34 AM:

Hi Alan,

As there are many variations, like you say in the manual, I would suggest your best course of action is to ask the seller the specific points you need to know. Get him to take the cover off and check inside with regard to the various settings in that particular projector.

There really is very little point in guessing, and even some members' machines could well be different from the one being offered.

Good luck,

Best,

Posted by Dave Cragg (Member # 401) on March 01, 2008, 10:19 AM:

Hi Alan,
yes the S940 is multi-voltage.
I have one myself which I bought from a German seller so had to change the voltage.
To change the voltage its a simple matter of taking the back off and turning the dial to the appropriate setting.

Dave

Posted by David Pannell (Member # 300) on March 01, 2008, 11:39 AM:

Hi Dave,

Alan also needs to know if the frequency is adjustable between 50Hz and 60Hz. Does yours have this facility, as, according to Alan's manual, some do and some don't? He needs to be sure that it will run at the correct speed, and therefore he needs a 60Hz capability as well as the 110/120 volt facility.

Just trying to help out.

Thanx,

Posted by Dave Cragg (Member # 401) on March 01, 2008, 02:16 PM:

Hi David,
yes the frequency can be switched from 50hz to 60hz and vice versa very easily; as Alan says, by switching a lead from one tap to another.
The S940 is manufactured to allow easy adjustment of both the voltage and frequency.

Dave

Posted by David Pannell (Member # 300) on March 01, 2008, 03:51 PM:

Splendid.

Thanx.

UBB.classic^TM 6.3.1.2