This is topic The Chinon Has Landed in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003653

Posted by Maurice Leakey (Member # 916) on April 26, 2008, 02:50 AM:
 
My friendly Forum members had varied responses when I announced my possible acquisition of a Chinon Sound 7500. I went ahead and now have put it through its paces.

There are many more desirable projectors than a Chinon. I suppose Elmo comes out on top. I have Elmos, Sankyos, Bell & Howells, Yelcos, an Agfa and a Bauer. Of all these the Elmos have been the most troublesome on purchase, usually due to loss of loops, reluctance to pass some joins and problem auto-thread. An ST1200HD needed servicing, and recent purchases of two GS-1200s will need professional attention due to their bad handling of film, and in one case. a Rice Krispie amplifier, i.e., snap crackle and pop.

It was therefore a joy to take the thirty-year old Chinon out of its original box and to watch it perform faultlessly. A rock steady picture, plenty of light (150w), and plenty of sound. The box still had all the internal packing which even extended to the lining of the 600' take-up spool. In the little cut-outs were the mic, earpiece, cutter, gate brush and even two packets of Silica Gel!

The most interesting item was the original receipt from Dixons dated 17th June 1978 for £189.95.

It features a push button speed selector with a small rotary control to vary the selected speed. The gate is all metal except for the plastic (relieved) front pressure plate. The gate's side contact is not sprung loaded. The projector has three unusual features. The side cover has a series of holes covered in green plastic which allows, via light spill from the lamp, a subdued green glow over all the lower operating panel. The large rotary control knob is white plastic with a lamp inside, this goes out when the projector is in operational mode.

The third item is the blower. In all the other projectors that I own (and that's 52) the fan always blows air over the lamp, however, the Chinon sucks in air over the lamp and then blows the warm air out near the side speaker.

The projector looks brand new, and smells brand new. It's obviously had very little use. And, I'm very pleased with it.
 
Posted by Mark Todd (Member # 96) on April 26, 2008, 03:19 AM:
 
Sounds great Maurice, and thats the one to buy,
But How Many !!!!!!!! Now??????
Best Mark.
PS how much was it " if its not a personal question" ( name thats film).
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2