This is topic Additional Movie Maker Projectors Reviews in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004653
Posted by Jon Addams (Member # 816) on July 01, 2009, 08:35 PM:
 
I checked Mike’s list against mine and I found several more Movie Maker reviews that do not appear on his list. I am posting these, sorry for any duplicates that may have slipped by.

Movie Maker Reviews of Super, Dual and Standard 8mm Projectors

Agfa Movector G
Bauer T3
Bauer T10
Bauer T15 Royal
Bauer T-82
Bauer T183
Bell & Howell 222
Bolex 18-5L
Braun-Nizo FP5
Braun Visacoustic 200 Stereo
Canon S-400
Chinon 7800H
Cineton P800 Play
Consulmatic
Dany De Luxe
Eumig 501
Eumig 510-D
Eumig Mark DL
Eumig P8 Dual
Eumig 824 Sonomatic
Eumig S910
Fumeo 9119
Fumeo 9145
Hanimex P300
Hanimex SR8600
Hokushin SC-8CM & SC-104CM
Hilldem All-8
Horipet Battery Operated
Ilford Elmo FP-C
Ilford Elmo AP-8
Kodak M-80L
Liesegang S1
Noris SM8
Norimat Electronic
Noris 342 Stereo
Norisound 110
Norisound 410
Optomax JE-1
Olympus Autoscope
Photophone Superlite
Prinz Compere
Rank Aldis 850
Rexina
Silma Bi-Vox
Tacnon 707
Yelco ES-720
Yelco DS-810 MT

If anyone needs one or a few, just send me an email to jaddams55 at hotmail dot com.

Jon

[ July 02, 2009, 02:08 AM: Message edited by: Jon Addams ]
 
Posted by Dino Everette (Member # 1378) on July 01, 2009, 11:39 PM:
 
Oh Jon yes please the elmo AP8 - If this projector had sound it would be my favorite hands down, but I still love it.......Did I mention remote control focus?? ? ? ? ? [Eek!]

Here's my baby in action

-
 
Posted by Jon Addams (Member # 816) on July 02, 2009, 02:07 AM:
 
On the way Dino, enjoy.

Jon
 
Posted by Trevor Adams (Member # 42) on July 02, 2009, 05:18 AM:
 
Hello Jon.In a 1981 MovieMaker(I think around August?)there was a review of a Hong Kong-made(Apollo),hand-held, stereo Movie Viewer.It appeared in the "New Products" section.I wondered if you would check the '81 mags for this item please?regards,Trev
 
Posted by Hans van der Sloot (Member # 494) on July 02, 2009, 05:48 AM:
 
Jon, I hope I won't ask too much if I say I would like these reviews:

Braun Visacustic 2000 Stereo
Eumig 501
Eumig P8 Dual
Eumig 824 Sonomatic
Eumig S910
Fumeo 9119
Fumeo 9145
Hokushin SC-8CM & SC-104CM
Liesegang S1
Norimat Electronic
Noris 342 Stereo
Yelco ES-720
Yelco DS-810 MT
 
Posted by peter booth (Member # 242) on July 02, 2009, 07:46 AM:
 
Hi Jon,
Have sent you an email,
Regards,
Peter.
 
Posted by Jon Addams (Member # 816) on July 03, 2009, 02:52 AM:
 
Hello Hans,

Not a problem at all. I was out-of-town today and just returned (3:49am in New York, got to catch some sleep) I will be sending your reports this evening.

Trev,
I am sorry; I don’t have the piece you are looking for.

Jon
 
Posted by Hans van der Sloot (Member # 494) on July 03, 2009, 05:56 AM:
 
Thank you very much in advance Jon.
 
Posted by Flavio Stabile (Member # 357) on July 03, 2009, 10:10 AM:
 
Hi Jon

I'm interested in

Braun Visacustic 2000 Stereo
Fumeo 9119
Fumeo 9145

Many thanks
Flavio
 
Posted by Dino Everette (Member # 1378) on July 03, 2009, 12:58 PM:
 
Jon [Frown] I'm sorry about being a pest. I think it is an aol thing that adds the compression.... Would you mind trying one of these other email addresses for the elmo AP-8 (pretty please [Big Grin] )
deverett at ucla dot edu

or

dinoeverett at ymail dot com
 
Posted by Jon Addams (Member # 816) on July 03, 2009, 03:36 PM:
 
Hello Hans,

I sent your reviews today. I had a bit of a problem sending the entire package in one file because of its size, had to cut it in three.

Please let me know if everything came in okay.

Jon
 
Posted by Dino Everette (Member # 1378) on July 04, 2009, 02:05 AM:
 
Jon you are an absolute king among men...Thank you so much for resending the AP-8 review - It came through crystal clear this time on the other email address.

I think it confirmed my thoughts on the projector as being a top notch machine - Here is my favorite excerpt-

"Unique indeed. The only 8mm projector to do the threading first and make the loop afterwards. There will probably never be another machine quite like it."

[Big Grin]
 
Posted by Flavio Stabile (Member # 357) on July 04, 2009, 03:00 AM:
 
Many thanks, Jon.. really apreciated!

Flavio
 
Posted by peter booth (Member # 242) on July 04, 2009, 05:00 AM:
 
Hi Jon,really appreciate the review on the Yelco 810 MT.
best wishes,
Peter.
 
Posted by Trevor Adams (Member # 42) on July 04, 2009, 05:57 AM:
 
Thanks for looking Jon,regards,Trev
 
Posted by Jon Addams (Member # 816) on July 04, 2009, 02:18 PM:
 
You are all welcome guys. Don't be shy, if you need, just ask and you shall receive. [Big Grin] [Big Grin]

Best

Jon
 
Posted by Hans van der Sloot (Member # 494) on July 11, 2009, 03:56 AM:
 
Hi Jon,

Thank you very much for the reviews.
But I only received the second file.
Can you please send the first and thirth file again?
Perhaps these 2 files were both a little too big.
 
Posted by Jon Addams (Member # 816) on July 11, 2009, 07:15 PM:
 
Hello Hans,

I sent the two missing files again, please let me know if they are okay. If not, I will repack them in smaller files and send them again.

Regards,

Jon
 
Posted by Hans van der Sloot (Member # 494) on July 12, 2009, 02:06 PM:
 
Hi Jon,

I received the remaining files.
Thank you very, very much!
 
Posted by Mark Todd (Member # 96) on August 30, 2009, 12:35 PM:
 
Hi I can`t seem to raise Jon via email so could anyone who got a copy of the Yelco 810 review send me a copy along please.

Keen to have a good read about these.Supposed to be super.

Many Thanks Mark.
 
Posted by Antonio Costa Mota (Member # 221) on August 30, 2009, 07:35 PM:
 
Hi Jon
I would appreciate your sending me the review on the NORIS 410.
Many thanks and regards. Antonio.
 
Posted by Jon Addams (Member # 816) on September 01, 2009, 09:35 AM:
 
Mark,

Antonio,

Your reviews are on the way.

Enjoy,

Jon
 
Posted by David Ian Turner (Member # 1667) on March 31, 2010, 06:41 AM:
 
Hi Jon Addams

I am looking at obtaining a dedicated Standard 8 projector and wondered if you would be good enough to e-mail me the Movie Maker reviews of these projectors:
- Bolex 18-5L, and
- Eumig P8 Dual
My e-mail address is dit at internode dot on dot net.

Thank you

David Turner
Morphett Vale
South Australia
 
Posted by Jon Addams (Member # 816) on April 02, 2010, 02:46 AM:
 
Hello David,

Reviews are on the way, enjoy.

Jon
 
Posted by David Ian Turner (Member # 1667) on April 02, 2010, 04:24 AM:
 
Thank you, Jon
I appreciate your prompt reply and I have received the reviews that I requested.

Unfortunately, I did not do enough research prior to making my request. I now realise that the Bolex 18-5L is a Super8 only projector. The Bolex 18-5 is a Standard 8 projector. And the Eumig P8 Dual is a more modern dual gauge projector than the Eumig P8 Standard 8 projector made in the 1960s.

May I make another request and ask which of the projectors that are in the Movie Maker reviews list are Standard 8 projectors?

Thank you again, Jon

David Turner
Morphett Vale
South Australia
 
Posted by Jon Addams (Member # 816) on April 02, 2010, 10:22 PM:
 
Hello David,

I don't know how many standard 8 projectors exist, I only have reviews for the following:

Agfa Movector G
Consulmatic
Horipet (Battery Operated)
Ilford Elmo AP-8
Leisegang S1
Olympus Autoscope, and
Rexina-8

Let me know if want any of these and I will be happy to send them to you.

Jon
 
Posted by David Ian Turner (Member # 1667) on April 02, 2010, 10:38 PM:
 
Thanks once again for your prompt reply Jon.

Unfortunately, none of the names on the list are familiar to me. I'll have to do some searching to see what is available here in Australia. Otherwise, I have noted brands and models mentioned by forum members that are available here so I will have a closer look at some of those.

Thanks again for your help.

David Turner
Morphett Vale
South Australia
 
Posted by Jon Addams (Member # 816) on April 07, 2011, 10:39 PM:
 
Mark,

Your review for the Bauer T183 its on the way, Ejnoy.

Jon
 
Posted by Rui Luis (Member # 3867) on October 27, 2013, 06:32 AM:
 
Hello John, can you help me with a NORIS Norimat electronic, iam thinking buy one.

Thanks
Rui
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2