This is topic 8mm pulled sprocket holes in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004798
Posted by Bradford A Moore (Member # 426) on August 29, 2009, 06:29 AM:
Hey All,
I just received a regular 8mm print with some pulled sprocket holes. Should splicing tape placed over it, like a splice do the trick, or should I think of another method? I don't want to loose any frames if possible.
Posted by Paul Spinks (Member # 573) on August 29, 2009, 07:04 AM:
You could try using 8mm Kodak Presstapes. It won't be perfect but it might help.
Paul.
Posted by Bradford A Moore (Member # 426) on August 29, 2009, 08:02 AM:
Hey Paul,
That was what I was thinking of using. I bet it will jerk a little, but at least pass through.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2