This is topic Metal rollers ST1200 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005262
Posted by Jeroen van Ooijen (Member # 1104) on February 04, 2010, 03:42 AM:
Hi people,
I have a question both metal rollers from my ST1200 don't turning around,i have clean it with alcohol very good but it goes for a little while and then it stops and then it goes stops goes stop and so on!
what can i do now to make them flexible?
The last white plastic roller doesn't has a function my movie don't hit him,is this normal?
I hope you can help me.
Jeroen
Posted by Jeroen van Ooijen (Member # 1104) on February 14, 2010, 12:45 PM:
Is there anyone serious with an answer for me???
Posted by Wayne Tuell (Member # 1689) on February 14, 2010, 01:18 PM:
I'm no expert on projector repair but when I do a complete roller cleaning as you describe I will use a light coating of synthetic oil on the roller base.
Posted by frank arnstein (Member # 330) on February 14, 2010, 03:07 PM:
Hi Jeroen
I agree with Wayne & suggest a tiny drop of light sewing machine oil to be applied to the rollers.
A dry roller may well get sticky due to friction so try oiling them to see if that fixes it.
Dogtor Frankarnstein
Posted by Jeroen van Ooijen (Member # 1104) on February 14, 2010, 04:16 PM:
Thanks i will try to do that!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2