8mm Forum: Bolex M8 Projector frame problem

This is topic Bolex M8 Projector frame problem in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005734

Posted by Zachary Reader (Member # 2204) on September 30, 2010, 12:37 AM:

After threading and running the projector, the image is split. I'm not sure if I threaded this wrong?

Your help is much appreciated.

-Zach

Posted by John Davis (Member # 1184) on September 30, 2010, 02:23 AM:

It just sounds like you need to adjust the frame line position. I'm not familiar with this machine but I'm sure someone will be able to tell you which knob you have to fiddle with,
John

Posted by Claus Harding (Member # 702) on September 30, 2010, 10:25 AM:

Zachary,

Look at the machine from the front, facing the lens. The frame adjustment is the red knob below the silver rewind roller.

Claus.

Posted by Zachary Reader (Member # 2204) on September 30, 2010, 04:19 PM:

Thanks for your help, finally have the full frame in there.

UBB.classic^TM 6.3.1.2