This is topic BFCC Ruislip in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006237

Posted by Brian James (Member # 1056) on May 19, 2011, 02:17 AM:
 
An excellent effort by Keith and his gang who keeps this function going year after year. It was nice to see some old faces again. For me the only crib was the bring and buy room which was too small. Lucky with the weather and I wonder if
comments would have been different if it had been hissing down with rain. I did joke with Keith about a tunnel marquee from A to B. I do agree with Graham on some points especially with costs going up each year. Anyhow well done all concerned.
 
Posted by John Clancy (Member # 49) on May 19, 2011, 02:46 AM:
 
Thanks for coming Brian. The efforts some go to for this event is amazing.

There is nowhere else to put the bring and buy. I suppose if there were less dealers it could have fitted in the dealer room by the front desk.

Any chance you can move your comments to the main 'Return of the BFCC' thread, or whatever it's called. Perhaps Doug can do that for you and then close this thread so there aren't multiple threads on the same topic.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2