8mm Forum: Bolex sound clarification

This is topic Bolex sound clarification in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006703

Posted by Akshay Nanjangud (Member # 2828) on December 09, 2011, 02:31 PM:

Hi,

I was reading the instructions on cleaning the sound head of my Bolex (the steps for a similar Eumig) in one of the replies here:

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006100

and couldn't understand how to "unplug the sound head", point 4. Specifically, what does 'unplug' mean?

Again in point 4, which 'single screw' connects the sound head to the chassis? There is a photo with an arrow in the previous reply. Is the 'single screw' the one the arrow points to that needs to be removed?

If I understand these steps, I can move on. Thanks in advance. :-)

UBB.classic^TM 6.3.1.2