8mm Forum: Marguet Tri-film splicer instructions

This is topic Marguet Tri-film splicer instructions in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006710

Posted by Clinton Hunt (Member # 2072) on December 11, 2011, 11:38 PM:

Hi all. does anyone know the correct way to use the Marguet 8mm/9.5mm/16mm splicer? (TRI-FILM)
Cheers

Posted by John Davis (Member # 1184) on December 12, 2011, 02:51 AM:

Hi Clinton, I use one of these - I'm at work just now but if no one else comes up with instructions - I'll check when I get back home,
John

Posted by John Davis (Member # 1184) on December 12, 2011, 02:57 PM:

Hi Clinton,
hopefully by now you'll have received a scan of the Marguet instruction leaflet,
John

Posted by Clinton Hunt (Member # 2072) on December 12, 2011, 11:44 PM:

Hi John, yeah got it today and that will be great for my splicer...
cheers

Posted by Ken Finch (Member # 2768) on December 15, 2011, 02:51 PM:

Hello Clinton, I was about to send you the instructions as I also have one of these splicers but I see you have now got them. Just shows how usefull this forum is to us.

Posted by Luigi Castellitto (Member # 3759) on June 08, 2013, 06:11 PM:

Where can I find instructions for this splicer? Do you know if, in addition to paste, also makes the operation of the cut of the film?
Thanks! [Smile]

Posted by Hugh Thompson Scott (Member # 2922) on June 08, 2013, 06:26 PM:

I have one of the Marguet splicers,but the gauges it splices are
std 8mm/super & 16mm, I don't think it does 9.5.

Posted by Luigi Castellitto (Member # 3759) on June 09, 2013, 07:56 AM:

Hi, Hugh! [Smile]

There is also a specific Marguet: http://farm4.staticflickr.com/3664/3394649043_d6725b0188_z.jpg?zz=1

Posted by Hugh Thompson Scott (Member # 2922) on June 09, 2013, 08:23 AM:

Thank Luigi, mine must be a later model.

UBB.classic^TM 6.3.1.2