This is topic Reinvent the wheel (Lamp). in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006836
Posted by Bruce Wright (Member # 2793) on January 28, 2012, 08:24 PM:
 
Here again! Have a Bell & Howell 482A projector that needs a new lamp. Yea-gads they cost over a $100.00 with a life of 15 hrs. Seems to me this lamp could be replaced with a halogen
(ENH) by use of a simple bracket and minor wiring. I can do this for a lot less than a 100 dollars plus the life is much longer. Has this been tried? I do have a fair knowledge of electronics and a small workshop. Any thoughts or information would be most useful.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2