This is topic Problem Solved! in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007102
Posted by Steve Klare (Member # 12) on May 15, 2012, 10:14 PM:
The last week or so my ST-1200HD has slowly developed this disturbing noise.
If I was driving a car and I heard this sound (and I have...), I'd think a bearing was about to pack it in and I'd better look into it before it took a lot of other machinery with it.
-just a nasty, grinding rumble.
Tonight it got so bad I didn't want to risk ruining a film in it, so I decided to take the rear cover off and have a look.
Turns out the rear cover wasn't tight!
I guess it doesn't always have to be complicated!
Posted by Janice Glesser (Member # 2758) on May 15, 2012, 11:02 PM:
I have a habit of initially thinking the worst myself at times. It's hard not to... knowing the age of these projectors. I'm glad it was a simple fix Steve.
Posted by Steve Klare (Member # 12) on May 16, 2012, 07:37 AM:
Thanks Janice!
At first I was thinking the motor bearings were the sound. I thought "If I can't lube them I'll have to replace the motor!"
Changing a motor is a lot of work, but you have to find one first.
Then I thought "I could get a healthy ST-1200HD and this one could be for parts."
-much better I just tightened the cover screws!
What's interesting is the psychology of it. I usually run with two projectors. The other one (ST-800) already had a film threaded and the screen was down. When this happened it bothered me enough I rolled the screen back up, unthreaded the film and grabbed my screwdriver. It wouldn't have been a big deal to limp along with one machine, but I just had to find out what was wrong!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2