This is topic Eumig 824 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007626
Posted by Maurice Leakey (Member # 916) on November 16, 2012, 10:48 AM:
What do owners of the Eumig 824 think of the little up/down switch which not only controls the mains voltage input (on & off) but also in the "off" position locks the main control knob?
I can see no point in the latter, nobody would expect to operate the projector in any function unless the motor was running.
With regard to the above paragraph, non-users of Eumigs may not be aware that as soon as they are plugged in, or on later machines, switched on, the motor starts immediately.
Posted by Dino Everette (Member # 1378) on November 16, 2012, 11:14 AM:
i actually like it as a master on off switch as sometimes, when i am running a bunch of films throughout the day I can just flip that switch instead of having to remember ti unplug it all together.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2