This is topic ELMO 1012XL Camera in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007739

Posted by Jake Mayes (Member # 3292) on December 20, 2012, 05:36 AM:
 
Hi guys, i was wondering if anyone has any experience with this camera, as I am thinking of buying one, to go alongside my chinnon 671. The chnnon is superb but I am now looking to up my game... My chinnon works well, but I am looking to add to my arsenal, and I need the option of a 220 degree shutter IF so needed.

Number 1: This will not meter 64T stock correctly, no problem with manually setting the exposure.
Number 2: Will this meter Velvia 50 fine at 40ASA... velvia is fine exposed at 40 for still photography so i would not see why not...
Number 3: Is the 220 degree shutter going to cause a noticeable loss of sharpness, my chinnon apparently has a shutter angle of less than 180 degrees, gives a sharp, crisp image. I need a 220 shutter for party conditions AND as Velvia is 50ASA i would rather the extra stop of speed for some purposes (they are going to be loading V100 also i think)

I have some 100D left, this camera would expose it at 160ASA, i could always do 2/3 of a stop push, leave it as is or manually set exposure, 160 ASA is within 100Ds latitude...

Any advice or knowledge on this camera would be appreciated! As many videos with such cameras are in low 360p quality on the web and many lack the sharpness factor I am looking for! Hopefully this is just a factor induced by the low quality video

Thanks [Smile]

Jacob
 
Posted by Bill Phelps (Member # 1431) on December 22, 2012, 05:44 PM:
 
Hello Jacob!

I can't answer any of your questions specifically but I have an ELMO 230XL and 240XL that has a 220 shutter and 1.2 lens and the footage I have shot is very sharp indeed...even drawing comments from some as to how sharp the picture is (projected) with such an old camera! As if "sharpness" is a new concept! Elmo's have very good lenses.

Bill [Smile]
 
Posted by David Michael Leugers (Member # 166) on December 25, 2012, 12:34 AM:
 
I don't want to put you off on buying one, but I owned one back when it hurt to pay for one. Great camera, I loved using it but it broke on me and the electronics board could not be fixed nor could replacements be gotten. I have seen lots of these cameras have the same problem. Make sure you run a full cartridge through the camera and have it developed and project it to fully test before you buy is my advice. If you have a good one they are a nice camera, a bit on the bulky side, but make very nice images. Good luck!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2