8mm Forum: Adjust claw (ELMO ST 1200 HD)

This is topic Adjust claw (ELMO ST 1200 HD) in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007783

Posted by Salvatore Romeo (Member # 2872) on January 03, 2013, 08:14 AM:

Hi to all .
J've a ELMO ST 1200 HD , and recently the image is not stable.J disassembly the claw and j 've seen that the plastic cilinder embedded in the claw's arm was a little worn (nothing of serious) ,and the below tooth have a little notch.J smooth gently , and the notch has disappeared, but now ask help because j 'dont know how adjust the claw.
No problem for lateral adjust (left-right), but the problem is for the front - rear adjust .J know that the claw should protrude for 1 mm , but j dont find the bolt to move (toward rear) the claw .For Elmo GS 1200 there is a dedicate bolt , but what shall j 'o for adjust the claw in longitudinal direction for ELMO ST 1200 HD?
Is possible to rotate the plastic cilinder for 180° ?
Any help?

Posted by Salvatore Romeo (Member # 2872) on January 04, 2013, 08:18 AM:

for my problem above 'j'm searching in the web the elmo ST 1200 HD SERVICE MANUAL (no the user manual) , but j do not find it.
Who can help me to find this manual ?
Thank you.

Posted by Bob Pucci (Member # 8) on January 04, 2013, 11:11 AM:

Hi Sal

Click on the left side of this web page where it says manuals and then click on 8mm projectors.The st 1200 hd manual is there.

Posted by Steve Klare (Member # 12) on January 04, 2013, 11:20 AM:

This is the service manual for the ST-1200 (non HD), but should be close enough:

ST-1200 Service Manual Free Download

Posted by Joe Taffis (Member # 4) on January 04, 2013, 03:57 PM:

I know this came up before, but I can't see that column on the left side with the manuals, chat room, etc.(that Bob mentioned) anymore. With either IE or Mozilla Firefox.

Posted by Steve Klare (Member # 12) on January 04, 2013, 04:08 PM:

I've had that problem too a while back. I deleted the link in favorites and came into the forum in some different way (not sure, it's been a while...) and then the sidebar appeared.

I favorited that webpage and have had the sidebar ever since.

Does this link help?

Posted by Joe Taffis (Member # 4) on January 04, 2013, 06:17 PM:

Thanks Steve! That did the trick! [Smile]

Posted by Salvatore Romeo (Member # 2872) on January 05, 2013, 11:42 AM:

Thank you Bob and Steve for yours help but j'just have the elmo st 1200 , but do not report any information about claw adjust.

UBB.classic^TM 6.3.1.2