This is topic Eumig Mark 610D lamp socket... in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007851
Posted by Zach Von Joo (Member # 2216) on January 23, 2013, 02:34 PM:
Who sells these? I had the same problem a while back with a different projector, now this one.
The 2-pin plastic & ceramic bulb socket is crumbling apart.
Thank you!
Posted by Pasquale DAlessio (Member # 2052) on January 23, 2013, 03:04 PM:
Zach
Try www.allelectronics.com
Good luck
PatD
Posted by Bill Rodgers (Member # 3483) on January 23, 2013, 06:23 PM:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330720355799
My Bolex 18-3 Duo had the same problem and I've been using one of these for the past six months with no problems.
Posted by Zach Von Joo (Member # 2216) on January 24, 2013, 01:41 AM:
Thanks guys! Bill, that one looks familiar.
I also found this one that looks as if it may work: http://www.bulbamerica.com/osram-sylvania-tp-57-gu-gx-gz-4-g-gx-gy-gz-6-35-lamp-holder.html
Posted by Bill Rodgers (Member # 3483) on January 24, 2013, 05:35 AM:
You should just need an MR16 lamp holder, suitable for 100w bulbs.
The Bolex 18-3 Duo was manufactured by Eumig and is virtually identical to your 610D.
Posted by Ken Finch (Member # 2768) on January 24, 2013, 12:39 PM:
These sockets are plentifull in the U.K. from most electrical and D.I.Y stores like B&Q and Maplins. Ken Finch.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2