This is topic Wireing diagram for a sankyo 700 in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007940
Posted by Barry Webb (Member # 1897) on February 20, 2013, 02:00 PM:
 
I have a sankyo 700 that has no power to the motor the motor tests ok so does the power from the transformer the lamp and amp work fine the 32volt power to the circuit board for the motor is also good. I have found a broken track on the board and put a bridge across but it just blows the motor circuit fuse now.
So if anyone has a circuit diagram for this machine it would be very helpful.
Barry.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2