This is topic running noise on elmo fp in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008449
Posted by Brian Stearns (Member # 3792) on August 08, 2013, 07:00 PM:
Started thus recently Elmo fp-c when run forward makes a constant squeaking noise like something is rubbing up against something. Funny part is when I run it in reverse I dont hear any noise. Could the claws be rubbing up against somthing. When adjust framer the sound changes. I know its not the spindles because I hear the noise when I took off the belt. Any help would be great
By the way films play fine on this
Thanks
Brian
Posted by Janice Glesser (Member # 2758) on August 08, 2013, 09:20 PM:
Have you isolated the sound to the gate area? If you could shoot a video with sound...that might be helpful.
Posted by Brian Stearns (Member # 3792) on August 09, 2013, 08:24 PM:
Hopefully fixed, I used a q tip and greased the golden hub that attached to the claw. Works great
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2