This is topic Help w/ Bell & Howell 461 A in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008572
Posted by Steve Sonsini (Member # 3936) on September 18, 2013, 06:29 PM:
 
Picked up this projector at the thrift store in non-working condition, opened it up, cleaned it inside and out, new belt, lubed up the gears, etc. Everything looks to be operating correctly, but when running the film through forward, it is all jumpy and jittery. It will run it in reverse as smooth as silk.
What am I missing? Hopefully something simple?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2