This is topic Bell & Howell 36SR Jumping A Bit in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009059
Posted by Timothy Price (Member # 1832) on March 23, 2014, 04:04 PM:
Howdy All-
My Bell & Howell 36SR is jumpy. Works PERFECT in reverse however!
Any advice or suggestions?
Thanks
Tim
Posted by James E. Stubbs (Member # 817) on March 31, 2014, 10:51 PM:
Sounds like a lower loop problem. I've seen this with my ST1200HD with badly lubed/ shrunken film. Give everything a good clean and lube, put in a freshly cleaned/lubed film. If it still does it check the alignment of everything below the gate.
Cheers,
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2