This is topic Removing the rotor from a Sankyo 2000h in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009199

Posted by Ian Brennan (Member # 3583) on June 03, 2014, 02:47 AM:
 
Hi there, I'm looking for some help. I want to remove the rotor blades from my Sankyo 2000h - but having partly stripped it down I'm now stuck.

To remove the blades, it looks like I have to remove the shaft - well that's what I did when I stripped a 100h.

It has a bearing that's not accessible from the "belt-side" of the projector, as the case has a casting - you can see it behind the fan here http://1drv.ms/1or60MQ

But it looks like it could be removed from the "lamp-side" - it seems that it's on a chassis that is removable.

But for the life of me I can't see how this is done. I don't really want to get in there with a Dermal and slice the rotors off, but I haven't the foggiest idea what to do next.

Anyone got an idea? Or a PDF of the service manual for the 2000h?

Even hints would be useful.... I'm that stuck!
Thanks in advance
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2