8mm Forum: sankyo claw 2

This is topic sankyo claw 2 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009459

Posted by Stan Stewart (Member # 4378) on September 30, 2014, 11:50 AM:

There are two springs attached to the claw and both seem to be strong. The claw looked a little bent out of shape. Could be the people who worked on the motor did something to the claw. I do hope the projector keeps working.

Posted by Andrew Woodcock (Member # 3260) on September 30, 2014, 05:00 PM:

Could be Stan, but the answer to any problem on projection jitter/ instability, is NEVER to bend the claw, so if I were you, I would be be finding out what the previous owner has done and why they thought it was the correct course of action??

UBB.classic^TM 6.3.1.2