This is topic Bolex 18-5 Super in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009486
Posted by Kevin Muise (Member # 4477) on October 11, 2014, 06:50 PM:
 
Hello first question post. I have two Bolex 18-5 super projectors that I have the same problem. Both projectors inch knobs are seized and unmovable. I have dismantled one to see how it "Works" the other I thought I would see if I am doing something wrong. The inch knob is solid. It does not turn. The motor runs and the belts just spin without turning the main drive gear. If anyone could help with this issue I would be forever grateful.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2