This is topic Belt Installation on ELMO 600 in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010198

---

Posted by Len Feiner (Member # 5034) on September 12, 2015, 11:32 AM:
 
I have an ELMO 600 projector and have new belts in hand. The longer belt was easy to install but I can not get the shorter belt on. There is not enough clearance to get the shorter belt around the larger pulley. What am I missing?
Thanks for helping a newbie!
Len
 

---

Posted by Janice Glesser (Member # 2758) on September 12, 2015, 03:09 PM:
 
Hi Len...Welcome to the Forum. I have the ST800. If the ST600 is the same...check out this thread with a photo where the belt goes on. If your machine is different perhaps someone else on the forum can advise.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010059
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2