This is topic Chinon C-300 light problem in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010603
Posted by Richard Holmes (Member # 5332) on April 03, 2016, 11:44 AM:
Hi
I have inherited a Chinon C300 projector which seems to have a problem with the light.
I have changed the bulb and tested the connection with a multi meter There seems to be current flowing at the connection but bulb doesn't light up. I have tried 3 new bulbs.
Could it be an issue with the quality of the current?
Has anyone else had a similar issue with a projector?
Thanks
Posted by Will Trenfield (Member # 5321) on April 03, 2016, 12:29 PM:
It could be a poor connection to the lamp socket. The terminals in the socket could be tarnished etc causing electrical resistance. A 100 watt lamp will draw a far greater current than a multi-meter.
Posted by Will Trenfield (Member # 5321) on April 03, 2016, 12:29 PM:
It could be a poor connection to the lamp socket. The terminals in the socket could be tarnished etc causing electrical resistance. A 100 watt lamp will draw a far greater current than a multi-meter.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2