8mm Forum: Reposted For Alan Gouger

This is topic Reposted For Alan Gouger in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010630

Posted by Andrew Woodcock (Member # 3260) on April 13, 2016, 07:29 AM:

I have reposted this old thread here for the benefit of Alan Gougar, and of course anyone else who may benefit from it. [Wink]

Only the initial post has any relevance, I may add!

This perfect solution has a given me a totally scratch free film path ever since and the guide cannot change its position now, not even accidentally, through wear of the thread or running vibrations etc etc.
Highly recommended simple and failsafe modification for these!

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=003410# 000000

[ April 13, 2016, 10:57 AM: Message edited by: Andrew Woodcock ]

Posted by Alan Gouger (Member # 31) on April 13, 2016, 08:49 AM:

Andrew thank you for posting the link I will give this a read and follow your advise. Thank you for the replies via PM I have some news to report but your mailbox is full:)

Posted by Andrew Woodcock (Member # 3260) on April 13, 2016, 09:40 AM:

Thanks Alan, I've now dumped a couple so feel free to post again thank you. [Wink]

UBB.classic^TM 6.3.1.2