This is topic 8 mm fullcoat in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010786
Posted by Craig McDowall (Member # 4654) on June 23, 2016, 11:59 AM:
I am finally transferring over audio from Super 8 film from reel to reel tapes (shot trains with 'wild sound' but I have one that I had transferred to 8mm full coat and don't have the original tape . . will it play on a R to R recorder? I'm thinking not due to difference in speed . . (think I have answered my own question!). Any other method off exporting from the full coat? Thanks in advance for any suggestions!
Craig
Posted by Stuart Reid (Member # 1460) on June 23, 2016, 12:03 PM:
If you were to transfer digitally you could adjust the speed afterwards.
Posted by Craig McDowall (Member # 4654) on June 23, 2016, 05:56 PM:
That's a great idea . . . using Final Cut Pro so shouldn't be an issue . . . which brings up the automatic question . . . "why didn't I think of that" . . .
Thanks Stuart !
Craig
Posted by Brian Fretwell (Member # 4302) on June 24, 2016, 05:53 AM:
If it was recorded on a full coat film recorder it will play, if on a projector there may be trouble lining up the head to the track. It may read but have bad signal:noise ration due to low signal and hiss from unrecorded oxide passing the head.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2