8mm Forum: ELMO ST 600 M 2 track

This is topic ELMO ST 600 M 2 track in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010803

Posted by Arturo Glez (Member # 4700) on June 30, 2016, 05:27 PM:

Hi friends I have received an elmo st 600 that does not works as a "present" someone have the service manual?

Or where to find it?

Thanks in advance, kind regards,Arturo.

Posted by Steve Klare (Member # 12) on June 30, 2016, 05:41 PM:

Hi Arturo,

I have a set of schematics for the ST-600 that I'd be willing to share (-and why not? Someone shared them with me!), but I've never seen an ST-600 service manual.

You should ask some questions: we have a pretty decent record figuring these things out among ourselves here.

Posted by Maurice Leakey (Member # 916) on July 01, 2016, 02:44 AM:

Oldtimer Cameras have a repair manual for the ST600, but not the ST600M. I expect most details are the same other than the slight differences.
http://www.oldtimercameras.com/manuals/camera-manual-elmo-st-600-3445.asp

Posted by Arturo Glez (Member # 4700) on July 02, 2016, 07:54 PM:

Thanks friends,

Steve you have a message, regards,Arturo.

Posted by Steve Klare (Member # 12) on July 02, 2016, 08:20 PM:

Hi Arturo,

You have an E-mail.

If you can measure your motor voltage, we can start to figure out what's going wrong.

Posted by Arturo Glez (Member # 4700) on July 04, 2016, 02:52 PM:

Hi Steve, thanks for your message, but I did not receive your email, can you check it? I send you my email again through private message now.Regards, Arturo.

Posted by Steve Klare (Member # 12) on July 04, 2016, 03:26 PM:

It was stuck in "Drafts"!

You should have it now.

(Sorry about that!)

UBB.classic^TM 6.3.1.2