This is topic SPEED POTS in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010894
Posted by Jim Schrader (Member # 9) on August 14, 2016, 04:26 PM:
Does anybody know where the speed pots are on a ST-TRV SUPER 8 unit?
[ August 14, 2016, 08:38 PM: Message edited by: Jim Schrader ]
Posted by Steve Klare (Member # 12) on August 14, 2016, 07:54 PM:
Hey Jim,
I've been puzzling over this one.
Do you really mean "speed pots"?
Posted by Jim Schrader (Member # 9) on August 14, 2016, 08:37 PM:
Sorry yes pots
Posted by Steve Klare (Member # 12) on August 14, 2016, 08:55 PM:
I'm looking at this picture on the Van Eck site:
ELMO TRV on Van Eck's Site
There is a large vertical PC board inside the front wall of the unit. I see cabling running over from the motor, so I'm guessing the motor control circuit and the pots are located there. ELMO is very fond of single turn pots about the size and color of a dime, although I'm not so fond of these myself!
Posted by Jim Schrader (Member # 9) on August 14, 2016, 10:25 PM:
Ok that's what I thought too I'll have to take the big wheel off to see if it's behind there. My units been modified so it looks somewhat different. Thanks
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2