This is topic Elmo st-180 rewind problem ? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011311
Posted by Jason Moffatt (Member # 4416) on March 02, 2017, 01:49 PM:
 
Hi all, i'm not shure if this is normal operation for these machines as i've never had another.It all works perfectly during projection but when rewinding, the rear takeup spool rotates very freely with no drag at all which causes the film to be wound loose on the front spool.Is there a way to adjust the rear arm drag so the film rewinds tighter or is this normal.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2