8mm Forum: Couple of parts needed for eumig 807D

This is topic Couple of parts needed for eumig 807D in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011331

Posted by Jason Moffatt (Member # 4416) on March 11, 2017, 07:59 AM:

Hi, i recently picked up a nice clean eumig 807D but it needs a new standard 8 top sprocket as this one is cracked and just spins freely on the shaft, its the later type which is perminantly attatched to the shaft and is held on by a tiny hex head grub screw in the side,it needs to match the one in the pictures as i think there are a few different variations.Also i need a super 8 sprocket which pushes onto it as this one is also broken, again it needs to match the one in the pictures.Any help would be much appreciated, just let me know the cost.I'm based in the uk.First here's the pictures of the perminantly attached standard 8 sprocket.

[IMG]http://i1016.photobucket.com/albums/af286/electric-banana_photos/IMG_1526_zps idm3nji4.jpg[/IMG]

[IMG]http://i1016.photobucket.com/albums/af286/electric-banana_photos/IMG_1525_zps exz85umd.jpg[/IMG]

[IMG]http://i1016.photobucket.com/albums/af286/electric-banana_photos/IMG_1520_zps dywal7ml.jpg[/IMG]

And here's pictures of the super 8 sprocket.One of the plastic locating lugs has broken off.

[IMG]http://i1016.photobucket.com/albums/af286/electric-banana_photos/IMG_1524_zps ve6mi6pl.jpg[/IMG]

[IMG]http://i1016.photobucket.com/albums/af286/electric-banana_photos/IMG_1522_zps vegi3cmw.jpg[/IMG]

UBB.classic^TM 6.3.1.2