8mm Forum: Kodak Instamatic M67 (Broken)

This is topic Kodak Instamatic M67 (Broken) in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011648

Posted by Zachary Phillips (Member # 6020) on August 06, 2017, 11:17 PM:

so i recently picked up a Kodak Instamatic M67 and i cleaned it up and then ran standard 8 reel of film through it with no issues. so i decided to run a reel of super 8 film through the projector and when i tried to switch between regular 8 and super 8 the handle broke off. so now i and stuck with a machine that i cant do anything with, and all of the information for this particular projector is only up for sale with no free online anything in general to help me. maybe i just haven't looked hard enough but if anyone has any experience with these machines i would love to hear if you think it can, and is worth fixing and if you know of someone i could possibly send it to for repairs.

Posted by Will Trenfield (Member # 5321) on August 07, 2017, 06:01 PM:

I've one projector where the handle had broken off but I can still switch between gauges using a screwdriver. Can you not do that?

Posted by Zachary Phillips (Member # 6020) on August 09, 2017, 12:19 AM:

I'm not sure if i can because the switch and the whole shaft the at is attached to it broke off so i have nothing to move, ill poke at it some more though.

UBB.classic^TM 6.3.1.2