8mm Forum: Elmo Service in the UK

This is topic Elmo Service in the UK in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011927

Posted by Michael O'Regan (Member # 938) on December 03, 2017, 06:31 AM:

Who is the best person, in the UK, to send my Elmo ST1200 to for a complete service, and how much is this likely to cost?

Posted by Maurice Leakey (Member # 916) on December 03, 2017, 08:46 AM:

Hello, Michael.
As Bill Parsons is not available at the moment, and Kevin Brown only does 16mm, I suggest John White.
http://www.the8mmshedshop.co.uk/

Posted by Tom Photiou (Member # 130) on December 03, 2017, 09:06 AM:

I sent an email to Kevon for my 16mm Elf but had no reply. [Confused]

Posted by Maurice Leakey (Member # 916) on December 03, 2017, 09:32 AM:

Tom
Try Kevin on his mobile number.

Posted by Kevin Hassall (Member # 2352) on December 03, 2017, 09:45 AM:

KeV serviced my gs1200

Posted by Tom Photiou (Member # 130) on December 03, 2017, 10:20 AM:

Maurice, is that the one ending 866 from the 16mm thread on here?
It's typical, i had to go to Nottingham last Tuesday for work, our head office is up there so always someone up and down. May work out perfect for me. [Wink]

Posted by Maurice Leakey (Member # 916) on December 03, 2017, 10:22 AM:

Yes, Tom, that's the number.

Posted by Tom Photiou (Member # 130) on December 03, 2017, 11:17 AM:

Thanks Maurice, i will call him tomorrow, [Wink]

Posted by Michael O'Regan (Member # 938) on December 03, 2017, 12:35 PM:

Thanks, Maurice. Looks like John is the man for the job.

UBB.classic^TM 6.3.1.2