8mm Forum: ST600 Extra Rollers Fitting.

This is topic ST600 Extra Rollers Fitting. in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011978

Posted by Mark Todd (Member # 96) on December 25, 2017, 01:38 PM:

Hi I would like to get the 2 rollers needed for the Elmo ST600 ( one the same one similar to the GS1200) and would of got Bill to do them and pop me a 2 bladed shutter in as well.

Sadly as we know Bill P is unwell at present.

Is there anyone else in the UK doing these rollers please.

I know the parts are available from Van Eck of Holland, but its only a £50 machine so looking for a more affordable route.

Many Thanks Mark.

Posted by Tom Photiou (Member # 130) on December 25, 2017, 04:08 PM:

Mark, i think from what i have read on here that Bill has officially retired from doing repairs full stop now,

Posted by Mark Todd (Member # 96) on December 25, 2017, 04:16 PM:

Hi Tom,thanks, I had heard sadly.

Hoping he can get well enough to do it again, whether he does or not. As long as he gets better.

Best Mark.

UBB.classic^TM 6.3.1.2