This is topic Elmo ESS cable in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012134

---

Posted by Marc Marti (Member # 404) on March 06, 2018, 05:14 AM:
 
Does anybody know how to build an ESS sync cable for the Elmo Gs-1200? Can't find them anywehere. Thanks!
 

---

Posted by Jason Smith (Member # 5055) on March 06, 2018, 05:46 AM:
 
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001956;p=1
 

---

Posted by Marc Marti (Member # 404) on March 07, 2018, 04:38 AM:
 
Thanks!
But I want to make a cable identical to the original one. It's for connecting the projector to Pedro's sync box. On the link they make a different cable, for using the line-out of the computer.
 

---

Posted by Paul Browning (Member # 2715) on March 07, 2018, 08:39 AM:
 
I have an original cable Marc, do you want the pin configuration only ?
 

---

Posted by Marc Marti (Member # 404) on March 07, 2018, 10:48 AM:
 
Yes, please.
 

---

Posted by Paul Browning (Member # 2715) on March 08, 2018, 01:22 AM:
 
Hi Marc, the pin connections do not cross over from end to end, no connection at all on the centre pin, checked two elmo leads....
 

---

Posted by Marc Marti (Member # 404) on March 13, 2018, 09:48 AM:
 
Thanks a lot, Paul!
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2