This is topic Eumig 610D twin in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012210
Posted by Barry Fritz (Member # 1865) on April 06, 2018, 11:36 PM:
The second picture here is of an Eumig 610D. Anyone care to guess what the brand/model the first one is? Hint: It is not an Eumig.
Posted by Brian Fretwell (Member # 4302) on April 07, 2018, 02:48 AM:
A Dixons Prinz pehaps? No idea what model.
Posted by Jason Moffatt (Member # 4416) on April 07, 2018, 03:53 AM:
Bolex ?
Posted by Will Trenfield (Member # 5321) on April 07, 2018, 09:37 AM:
Eumig also made projectors for Revue and Montgomery Ward.
Posted by Maurice Leakey (Member # 916) on April 07, 2018, 10:10 AM:
Bolex 18-3 TC
Posted by Barry Fritz (Member # 1865) on April 07, 2018, 10:44 AM:
It is a Bolex 18-3 Duo. I am not sure how a TC differs from a Duo, but I am sure the guts are the same.
The only difference I see between the two shown here is that the Bolex has a switch with a blue wire running to it. On the pic, it is on the left edge about 3/4 of the way down from the top. I don't know what that switch does.
Posted by Maurice Leakey (Member # 916) on April 07, 2018, 11:11 AM:
The Duo came with a Bolex HiFi f:1.3\F:15-30mm.
The TC, in addition to the above, also could be supplied with a Bolex HiFi f:1.2\F:12.5-25mm.
Posted by Jason Moffatt (Member # 4416) on April 08, 2018, 08:19 AM:
Also the later bolex TC had a focus knob where as the earlier duo had the threaded lens that you twisted for focusing similar to the eumig 501 & 502
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2