This is topic Missing Eumig S824 std 8mm small sprocket (front) part in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012970
Posted by Tim Murray (Member # 4555) on June 08, 2019, 08:27 AM:
 
Hi I have a eumig s824 which is missing the front std 8mm sprocket (small). This is normally a permanent part of the projector. I have found a broken down S802D which has the same sprocket arrangement as the s824. Does anyone know how best to remove the std 8mm small permanent sprocket and then fit it to an s824? Thanks Tim
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2