8mm Forum: Help! Eumig S 810 D LUX speed probblem

This is topic Help! Eumig S 810 D LUX speed probblem in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012986

Posted by Arturo Glenn (Member # 7005) on June 18, 2019, 03:21 PM:

Hi friends, i have an Eumig 810 Lux model and the speed does not work well, at 24fps goes little slow and when I rewing did not support all the reel and stops during rewind. I have read the historical of this problem in this forum and I see different solutions and I do not know what is the correct.

I read:
- Let the projector run with stopped motor one hour
- Clean rubber discs with isopropylic alcohol
- Go to the internal screw behing 24/18fps lever and move it or tightened.

What is the solution? exists or not? I do not want break my adorable machine.

I have another Eumig S 802 Super 8 and I have tightened the aforementioned internal screw and goes more quickly than 24pfs now the voice is near to the voice of smurfs, a little.

I have another doubt how goes mounted the 3 rings of this screw? the 2 silver and one bronze rings? I dont remember how were mounted maybe the 2 silver rings over bronze ring? or una silver over the bronze rind and under bronze ring the another silver ring?

A friend here has the service manual to see it? How I can get the service manual of Eumig 810?

I would like a lot that my EUMIG 810 LUX works well could be a dream, I like a lot this projector with the suprogon lens.

Thanks in advance for your help. A big hug friends.Arturo.

Posted by Steve Klare (Member # 12) on June 19, 2019, 03:59 PM:

There is a control to adjust for the frequency of the input power. Since you live in a 50 Hz. country, if it happens to be set for 60 Hz. the tone will sound 20% too high.

(-costs nothing to check!)

Look at Page 5

Maybe somebody else used this to try to speed up!

UBB.classic^TM 6.3.1.2