This is topic Hanimex Dual Matic - Instructions in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013009
Posted by Rob Lambert (Member # 7026) on July 08, 2019, 10:00 AM:
Hi,
My wife got some items of her late father’s out of storage which includes a Hanimex Dual Matic projector and dozens of reels of film from her childhood. The projector hasn’t been used for at least 30 years and I have never used a cine projector of any kind before, but I managed to work out enough to load a real of film and play it.
However, I’m not absolutely certain that I have the film running through all of the correct rollers and I’m not sure what one or two of the controls do.
Does anyone know where I might find some instructions for the projector?
Thanks
Rob
Posted by Maurice Leakey (Member # 916) on July 08, 2019, 10:49 AM:
Rob
I don't know this projector but I have found a picture and details.
https://www.filmkorn.org/super8data/database/projectors_list/projectors_hanimex /hanimex_500.htm
Having examined the picture I can give you the following details.
Left Knob = Forward/Reverse, with motor and motor/lamp.
Right Knob = Speed control.
Bottom Sliding Knob = Super 8 or Standard 8.
Higher Sliding Knob = Framing of picture.
Round Knob = Focus.
Knob At Front = Hand rotation of mechanism.
I hope this may help you.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2