This is topic Eumig 824 and LS-800 external speaker in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:;f=1;t=013164

Posted by Grant Melton (Member # 7129) on October 30, 2019, 12:01 PM:
I am relatively new to 8mm/Super 8 and am wondering how well a Eumig LS-800 external speaker would pair with the Eumig 824 Sonomatic. I'm fairly happy with the sound from the projector, but I'd like to get the sound into the room a bit more. Thanks for any comments on this.
Posted by Maurice Leakey (Member # 916) on October 30, 2019, 12:07 PM:
I have no personal experience of this speaker but as it's "built for the job" it should give excellent results and can be placed near the screen.
Posted by Paul Adsett (Member # 25) on October 30, 2019, 12:58 PM:
The LS800 speaker is 4 ohms and exactly matched to give maximum power from the projector's internal amplifier. It gives much better sound than the little internal speaker on the projector, and having the speaker right up next to the screen also makes another huge difference.
But better still is taking the line output from the projector through an AVR with equalizer options, and then connected to even larger 8 ohm speakers.

[ October 30, 2019, 02:54 PM: Message edited by: Paul Adsett ]
Posted by Grant Melton (Member # 7129) on October 30, 2019, 10:42 PM:
I took the plunge and bought should be here next week. Looking forward to experimenting with it, and possibly trying a hookup to my stereo system (which includes an equalizer). Thanks for the replies [Smile]

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation