This is topic NOW SOLD Bambi Derann 3 x 600ft Full Feature For Sale £85 in forum 8mm films for sale/trade/wanted at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=007526
Posted by Kevin Clark (Member # 211) on January 30, 2019, 02:01 PM:
NOW SOLD I have for sale my print of Bambi, the Disney classic animated feature.
This is a Derann full length feature 3 x 600ft Super 8 colour sound in the original Derann box as shown. The box has some wear and a torn section on the front picture.
The print is on Agfa low fade mylar stock - please see the screenshots below - overall the condition is good but please note:
THIS PRINT HAS EMULSION SCRATCHES!
Yes the nasty green ones from the end of part one, through most of part two, then part three is much better. Not there all the time but very noticeable when they are there.
This is the reason for the keen pricing so again please note:
THIS PRINT HAS EMULSION SCRATCHES!
I will post anywhere Internationally and payment by PayPal only please.
NOW SOLD Price: £85 plus postage extra.
Kevin
Posted by Lee McCaffrey (Member # 6488) on January 30, 2019, 02:05 PM:
Hi Kevin, PM sent.
Posted by Kevin Clark (Member # 211) on January 30, 2019, 02:12 PM:
Thank you Lee, you were first in line and Bambi is now yours.
Kevin.
Posted by Paul Adsett (Member # 25) on January 30, 2019, 02:47 PM:
Kudos to Kevin for clearly pointing out the damage in this print. There should be no unpleasant surprises for Lee, he knows exactly what he is getting - a superb print with heavy scratches.
If only everyone would sell their prints with such an honest description!
Posted by Winbert Hutahaean (Member # 58) on January 30, 2019, 11:41 PM:
Why I found the screen shots are clear print to me. Where is the scratch?
Posted by Kevin Clark (Member # 211) on January 31, 2019, 03:28 AM:
Thank you Paul - honesty is the only policy that matters and it's the way I am in everything I do not just in this hobby.
Winbert - I would need to record the whole film or sections as a video and upload to YouTube or similar for the scratches to be as clear as you wish to see them - single shot camera frames rarely pick up the type of wear I have clearly described.
My screenshots are there to give a good visual interpretation of the print colour and sharpness allowing for any inaccuracy in the equipment (camera / monitor etc.) being used.
I'm happy to continue with discussions about screenshots or any aspect of my film collection sell off (hundreds still to go) but would prefer to do that in a separate thread in the General Yak / Super 8 or 16mm sections rather than bogging down a sales thread as per forum rules.
Kevin
Posted by Osi Osgood (Member # 424) on January 31, 2019, 12:21 PM:
Good price, that's for sure!
Posted by Michael O'Regan (Member # 938) on February 01, 2019, 05:24 AM:
Nice print.A bargain at that price.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2