8mm Forum: Need Part For Elmo ST-100

This is topic Need Part For Elmo ST-100 in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000027

Posted by Dan Lail (Member # 18) on January 06, 2004, 03:27 PM:

The 1/8 inch Moni out on my ST-100 is kaput (I destroyed it with a soldering iron. Not intentionally). Do I have to buy a junker to get a replacement or is it possible to find a mini out? [Big Grin]

[ January 06, 2004, 10:55 PM: Message edited by: Dan Lail ]

Posted by Tony Milman (Member # 7) on January 06, 2004, 05:07 PM:

Dan, I would imagine these are fairly standard stock for most electronic shops. We have Maplin in the UK which I would guess will stock something similar so if you can't track one down States side then I will be happy to go hunting in the UK.

Posted by Bob Pucci (Member # 8) on January 06, 2004, 05:43 PM:

Radio Shack should have them.I believe they are called 1/8 mono phone jack.

Posted by Dan Lail (Member # 18) on January 06, 2004, 05:48 PM:

Tony, thanks for the offer. I'll check a few places around Atlanta and the Net first. This part has six contacts that solder into the circuit board. I too, thought it might be a generic part used in many different machines, but I'm more of a mechanically oriented person than electronic. Perhaps I could post a photo and diagram. I'll get my welding torch and TNT and see what I can do. [Eek!]

UBB.classic^TM 6.3.1.2