8mm Forum: In search of Elmo GS-1200 Capacitor for Rerecording

This is topic In search of Elmo GS-1200 Capacitor for Rerecording in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000155

Posted by Dimitrios Kremalis (Member # 272) on April 02, 2005, 02:50 PM:

Does anyone know where to get those capacitors (preferably in Europe)?
I've read an older thread regarding pf and tolerances of the capacitor, there isn't however any mention of a source for them.
I've asked Conrad, Germany's major electronic store, and they seemed incapable of finding the exact capacitor mentioned here.
Thank you very much,
Dimitris

Posted by Kevin Faulkner (Member # 6) on April 02, 2005, 04:15 PM:

Hi Dimitrios,
The cap in question needs to be 3300pf rated at 600v DC.
The ones I use as replacements are 3300pr at 630v DC and can be obtained from RS Components here in the UK. ( www.rswww.co.uk )
Their part number is 820-999.
I dont know if they will ship outside of the UK but if not then I can get them for you and post them on. They come in packs of 5.

Hope that helps, Kev.

Posted by Dimitrios Kremalis (Member # 272) on April 02, 2005, 11:25 PM:

Thank you soooooooooooooooooooo much Kevin!!!!!!
Have a great weekend!

Posted by Kevin Faulkner (Member # 6) on April 03, 2005, 04:35 PM:

Dimitrios, Did you manage to order some? I noticed they are out of stock and will be discontinued. [Frown]

Kev.

Posted by Dimitrios Kremalis (Member # 272) on April 03, 2005, 05:37 PM:

No unfortunately [Frown]

. I noticed too that they are out of stock [Frown]

Seems I'll still have to continue searching..
Do you have maybe any other sources Kevin?
Have a nice week,
Dimitris

Posted by Kevin Faulkner (Member # 6) on April 03, 2005, 05:41 PM:

I'm looking at the moment. I think these ones were made by Wima in Italy.
Ugo may know of another supply.
If its only a couple you need I do still have some left.

Kev.

UBB.classic^TM 6.3.1.2