8mm Forum: Eumig take up gears needed

This is topic Eumig take up gears needed in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000234

Posted by Scott Balko (Member # 487) on November 05, 2005, 07:43 PM:

I need the three idler gears in the take up arm for a Eumig 820. My son was messing with the projector and the gears "mysteriously" [Roll Eyes]

disappeared.

Thanks

Posted by Kevin Clark (Member # 211) on November 12, 2005, 02:19 PM:

Scott
I have a partially stripped Eumig 802 I have used for various spares and as far as I can recall it still has the take up and feed arms fitted. If you stil need the gears let me know and I can send them out to you.
Kevin

Posted by George Patoulidis (Member # 452) on November 17, 2005, 10:45 AM:

Kevin, If Scott doesn't need them anymore I'll take them!
I have an Eumig 807 with the same problem.
So, if these are still available please send me a PM.

Posted by Scott Balko (Member # 487) on November 18, 2005, 01:16 PM:

I'll take them. Can you email me privately at scotlisa@myclearwave.net so we can take care of the details?

Posted by Kevin Faulkner (Member # 6) on November 18, 2005, 04:50 PM:

George, I also have an 802 which is partially stripped down but the takeup arms are intact.

Kev.

Posted by Kevin Clark (Member # 211) on November 18, 2005, 05:13 PM:

Hello George
Scott has responded via PM to my original reply post and my gears are about to be posted to him, however I'm pleased to see Kev Faulkner may be able to help you so hopefully all will be OK with your machine soon. I'm pleased I kept this model for parts as it has been a useful doner for about four other Eumigs to date.
Kevin

Posted by Kevin Faulkner (Member # 6) on November 18, 2005, 07:18 PM:

Yes George the parts you require are yours if you want them still. Just let me know, Kev.

Posted by George Patoulidis (Member # 452) on November 19, 2005, 11:12 AM:

Thank you Kevin
That would be great.
Right now the projector has a thin belt instead of the gears.
A custom job made by me [Cool]

, it works, but not perfectly.
Therefore the gears are more than welcome.
I'll PM you for the details.
Thanks again!

UBB.classic^TM 6.3.1.2