This is topic Wanted: R8 tape splicer in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000423

Posted by Rob Koeling (Member # 35) on March 02, 2007, 08:15 AM:
 
I don't think I've ever seen one. but there must be something like this out there. Does anyone have any recommendations? Or even better, does anyone have one for sale?

Please, drop me a note if you have.

Cheers,

-- Rob
 
Posted by Kevin Clark (Member # 211) on March 02, 2007, 10:41 AM:
 
Hello Rob
I can definitely recommend the CIR or Ferrania Std 8 tape splicers as they use rolls of unpunched tape so you will never find them obsolete as may be the case with some tape patch types. I personally use a Rondo std 8 tape slicer with a roll of CIR type tape fitted and it works a treat. Another way is to use your CIR 16mm splicer, apply tape to one side of the std 8 film then flip it over, finally move the film one perf to the left then one perf to the right closing the unit each time to punch out the extra holes compaired to 16mm. Worth giving it a go and again this method has worked well on my films in the past.
Kevin.
 
Posted by Rob Koeling (Member # 35) on March 05, 2007, 05:26 AM:
 
Hi Kevin,

Thanks for your reply. I was wondering about using the CIR 16mm splicer. I'll give it a try tonight.
I don't think you see the R8 tape splicers advertised very often. I'll keep my eyes open.

Best,

- Rob
 
Posted by Yanis Tzortzis (Member # 434) on March 05, 2007, 05:31 PM:
 
You can also search in eBay Germany or eBay France-they usually got some good offers if they would ship abroad(last year I saw one for a CIR Std-8 in Germany). But again keep your eyes in the UK-Just before x'mas I got a Ferrania one from a woman in Glasgow for less than a fiver [Wink]
 
Posted by Lee Mannering (Member # 728) on March 06, 2007, 05:52 AM:
 
If it helps I have a as new Wurker Standard 8mm tape splicer in the box, and complete with some new tape spices.
Send me a pers message for details.
Kindest regards
Lee.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2