8mm Forum: Elmo 1200hd parts!

This is topic Elmo 1200hd parts! in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000624

Posted by Tassos Laudas (Member # 588) on July 03, 2008, 06:22 AM:

Any advice where to look for a spare Elmo part would be welcomed. As i've already mentioned in another thread I've received an 1200hd lacking this specific part so it won't work properly. Thank you in advance

Posted by Yanis Tzortzis (Member # 434) on July 03, 2008, 07:04 PM:

Hi Tasso,
do you know Bill Parsons here in the UK? He's an expert on ELMOs & might help you.

Posted by Tassos Laudas (Member # 588) on July 04, 2008, 04:11 AM:

Yanis thank you. I know that Bill could help but i've lost his email address, could you please send it to me?

Posted by Yanis Tzortzis (Member # 434) on July 04, 2008, 04:21 AM:

Tasso,
there you go:
billparsons at bparsons97.freeserve dot co dot uk

[ July 04, 2008, 08:01 AM: Message edited by: Kevin Faulkner ]

Posted by Kevin Faulkner (Member # 6) on July 04, 2008, 08:01 AM:

Please don't give out other peoples email addresses here on the open forum without modifying it first.

There are people out there who collect email addresses off public web sites to use for spam.

I have modified Bills address above.

Kev.

Posted by Tassos Laudas (Member # 588) on July 04, 2008, 11:17 AM:

Kevin i've caused this, please accept my apology.

Posted by Yanis Tzortzis (Member # 434) on July 06, 2008, 10:44 AM:

My apologies too,was so absent-minded; it didn't even occur to me...

Posted by Kevin Faulkner (Member # 6) on July 06, 2008, 12:06 PM:

Apologies accepted [Smile]

Kev.

Posted by James E. Stubbs (Member # 817) on July 19, 2008, 05:07 AM:

On my side of the pond there's Leon Norris in Norristown, PA. I don't have his contact info handy, but he has an add in Super 8 Today. Some other folks here surely also have his complete contact info. I've had great luck getting part for my HD from him.
Cheers,

Posted by Kevin Faulkner (Member # 6) on July 19, 2008, 07:20 PM:

Which part exactly are you looking for? Can you put a pic up here on the forum of the part which is missing?

Kev.

Posted by John Capazzo (Member # 157) on September 24, 2008, 03:42 AM:

[ October 11, 2008, 01:08 AM: Message edited by: John Capazzo ]

Posted by Tony Stucchio (Member # 519) on September 24, 2008, 08:12 PM:

John,

Are you the one that won that eBay auction a couple of days ago for the machine minus those parts?

Posted by John Capazzo (Member # 157) on September 25, 2008, 03:41 AM:

[ October 11, 2008, 01:09 AM: Message edited by: John Capazzo ]

UBB.classic^TM 6.3.1.2