This is topic Eumig 926GL in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000647
Posted by Burt Anell (Member # 887) on August 20, 2008, 09:34 AM:
Hi
I Have a broken 926GL which is going in the bin unless someone wants it. Just pay the postage.
Motor seems like bearings have gone.
JUST FOR SPARES.
Posted by Maurice Leakey (Member # 916) on August 20, 2008, 10:36 AM:
Burt
I have sent you a PM.
Posted by Steven J Kirk (Member # 1135) on August 20, 2008, 12:42 PM:
Don't throw this away! Give or sell it to someone. The soundheads and circuit board also fit the S938 Eumig, of course. I have one already for this precise purpose.
Posted by Burt Anell (Member # 887) on August 22, 2008, 09:37 AM:
It's gone to Maurice!
Posted by Maurice Leakey (Member # 916) on August 22, 2008, 11:44 AM:
Yes. It's arrived.
Eumig spares are hard to get and I've got a S926GL and a S938, both of which made need assistance at some time.
Thank you Burt.
Posted by Paul Adsett (Member # 25) on August 22, 2008, 12:36 PM:
I have the same philosophy as Maurice. I have two 926's sitting on the shelf to provide any spare parts that I may need in the future for my 938. You will sometimes notice on ebay, people selling a broken down projector as individual spare parts, knobs, gates, sprockets etc. I don't know how successful that it for the seller, but if you are looking for spare parts for a particular projector you are probably much better off getting a cheap broken machine as Maurice has done.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2