8mm Forum: Manual downloads

This is topic Manual downloads in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000961

Posted by John Almond (Member # 1782) on January 19, 2010, 02:31 PM:

http://www.ephotozine.com/equipment/manuals/a

For thoses that have not seen this site before, Iv'e only just found it........might be of some use

Posted by Hans van der Sloot (Member # 494) on January 20, 2010, 04:34 AM:

Have you seen the prices they charge?
About € 13,- for 1 reprinted manual.
I'm sure you can get most manuals through forum members as PDF for free.

Posted by Christian Bjorgen (Member # 1780) on January 20, 2010, 06:51 AM:

http://www.film-tech.com

The forum's main page has quite alot of them too!

Posted by Hans van der Sloot (Member # 494) on January 20, 2010, 08:03 AM:

Yes, but hardly any 8mm manuals.

Posted by Richard C Patchett (Member # 974) on January 20, 2010, 11:24 AM:

Too costly
Unless you really need them.
RC

Posted by John Davis (Member # 1184) on January 20, 2010, 12:19 PM:

I know I've mentioned this site before but it might be good to have all the useful sites under one thread
http://www.super8-projektor.de/index.php?site=downloads
John

Posted by Stewart John Boyle (Member # 1785) on January 20, 2010, 12:33 PM:

Excellent site John, we must all pool together to get as much for free as we can [Smile]

Im a typical penny pinching Scot.
As Billy Connolly put it
"There`s a nasty rumour that copper wire was invented by Two Scotsmen fighting over a Penny ! "
Stewart

Posted by Gian Luca Mario Loncrini (Member # 1417) on January 22, 2010, 09:28 AM:

Anyone in a position to supply the GS 1200 Xenon one?

Posted by Douglas Meltzer (Member # 28) on January 24, 2010, 01:03 PM:

Gian,

The GS-1200 Xenon manual is available on our own site .

Doug

Posted by Gian Luca Mario Loncrini (Member # 1417) on January 26, 2010, 05:55 PM:

Great. Thanks Doug [Wink]

UBB.classic^TM 6.3.1.2