This is topic Wanted: Pressure Pad, etc for Eumig in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001011
Posted by Jon Addams (Member # 816) on March 09, 2010, 10:45 PM:
I am in need for a pressure pad and film track, Regular and Super 8 mm for the Eumig Mark S 802D projector.
You can answer here or send me an email at jaddams55 at hotmail dot com.
Thank you
Jon
Posted by John Capazzo (Member # 157) on March 13, 2010, 06:35 PM:
Which do you need? The film gate and pad will both have S on them (super 8) and the other two won't. Which do you need? The film pad will be thicker when you join them together. Also, do you have all four sprockets?--John
Posted by Jon Addams (Member # 816) on March 13, 2010, 10:15 PM:
Hello John,
All I have is the projector and the four sprockets; I don’t have any gates or pads super or regular 8. Thanks
Jon
Posted by John Capazzo (Member # 157) on March 21, 2010, 09:23 AM:
Jon, I have one of the pads. I have a parts source that may have another. I will let you know early this week.
John
Posted by Jon Addams (Member # 816) on March 23, 2010, 10:39 AM:
Thank you John, let me know when you can, I am in no real rush!
Jon
Posted by Jon Addams (Member # 816) on April 08, 2010, 04:08 PM:
Any news on that source John?
Thanks
Posted by Jon Addams (Member # 816) on June 20, 2010, 09:17 PM:
Bump
Jon
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2